All Collections
AC Inverter Emergency Power Systems
HPS
Mid-size electrical inverter systems for powering up to 375 to 600 watts of
incandescent, fluorescent, induction or LED lighting loads. Pulse width modulated
(PWM) output design provides clean, 60 Hz sinusoidal emergency power to
fixtures up to 1000 feet away.
LPS
Higher Wattage Inverters
Sinusoidal ouput from 375W to 1150W at 120VAC or 277VAC
MPS
Emergency Micro Power Systems
Sinusoidal output from 20W to 55W, at 120VAC or 277VAC
BUILDER Contractor Thermoplastic Exits
A wide range of contractor and industrial grade exit signs with thermoplastic or die cast housings, including Outdoor, Hazardous Atmosphere, and NEMA 4X rated models. Some models are also available with custom legends and paint finishes.
BLD
Builder Universal Thermoplastic
Thermoplastic standard profile, standard test configuration
BLT
Thin Thermoplastic Exit Sign
Thermoplastic low profile, standard test configuration
BPW
Wet Polycarbonate Exit Sign
Polycarbonate, compact housing, optional custom lettering
ELX
Edgelit Aluminum Exit Sign
Aluminum housing, field install cheverons, optional custom lettering
CRYSTAL Edge-Lit Exits & Custom Signs
Edge-lit architectural designs with extremely uniform lighting, extruded aluminum housings and trim plates with satin enamel finishes, unlimited optional colors, custom panel sizes and custom lettering. Standard AC input with or without integral battery, or low voltage operation from Signtex central battery systems.
CRR
Crystal Recessed
Recessed top, End or Wall Mount, aluminum housing, optional custom lettering
CRRF
Free Lens End Mount
CRRW
Wall Mount Waterfall Lens
CRS
Crystal Surface Mount
Universal Wall or Ceiling, compact aluminum housing, optional inverted mount.
DC Central Battery Emergency Power Supplies
CBM
Central Battery with MARS® Automatic Diagnostic Reporting System
Includes MARS™Automated reporting system for code compliance
CBL
Commercial Grade Central Battery with Integral Self-Test Diagnostics
Includes standard self-test diagnostics, and optional Building Management Interface
EMLITE ™ General Lighting with Emergency Lighting Controls
A wide range of general lighting fixtures with optional factory installed Emergency Lighting Control (ELC), allowing highly efficient low-voltage operation from Signtex central battery DC power systems.
View EMLITE ™ General Lighting with Emergency Lighting Controls Collection
Emergence Self-Luminous Exit Signs
EMA
Emergence Self-Luminous Series
Low profile aluminum housing, 10 or 20 year life
EMP
Emergence Self-Luminous Series
Green light output for maximum visibility in dark conditions. No external light or power is required for activation.
Emergency Lighting Controls
P1
Emergency Lighting Control
Shrink wrap module for slim linear or compact luminairs, EPR to 15W
P2
Emergency Lighting Control
Thermoplastic Housing for medium power luminairesl, EPE to 20W
P3
Emergency Lighting Control
Thermoplastic Housing Fiberglass reinforced for compact, medium power luminaires, EPR to 20W
P6
Emergency Lighting Control
Thermoplastice housing fiberglass reinforced for J-Box external mount, EPR to 20W
P7
Emergency Lighting Control
Extruded Aluminum housing for high bay luminaires, two driver output, EPR to 60W
GUARDLITE Regionally Approved Exits, Combos & Safety Signs
Edge-lit architectural designs with extremely uniform lighting, extruded aluminum housings and trim plates with satin enamel finishes, unlimited optional colors, custom panel sizes and custom lettering. Standard AC input with or without integral battery, or low voltage operation from Signtex central battery systems.
CAEFP
Crystal Accessible Exit Master Remote System
High Level edge-lit Exit with Die Cast Floor Level combination
CAL
Chicago Approved Steel LED Exite & Emergency Combo
Steel housing, two 5.3W lamp heads, remote capacity 10W
CAX
Chicago Approved Steel Exit/Stair Sign
Steel housing, backlit Exit/Stair, surface mount
CHI
Steel housing, two 6V, 3.3W lamp heads, remote capacity 5.4W
Indoor General Lighting Luminaires
PNL
Ultra-Thin, Uniform Backlit Panel with Optional ELC
Panel, Backlit Aluminum Frame,recessed or surface mount
SLL
Lumen and Kelvin Field Selectable Strip Light
Strip Light 4' and 8' Lumen & Kelvin Selectable, steel housing
MOONLITE LED™
Architectural products with low-profile stylish metal enclosures with surface or recessed mounts, combined with special optics for high-performance lighting, and custom finishes are available. All models operate from the Signtex central battery system, or an integral battery, or AC power with no internal battery.
Pathguard
Signtex Central Battery Emergency Power Supply Systems (EPSS) provide the most cost effective and accurate means to comply with performance limits, maintenance, and routine testing mandated by Life Safety Code NFPA 101.
CBM
Central Battery with MARS® Automatic Diagnostic Reporting System
Includes MARS™Automated reporting system for code compliance
CBL
Commercial Grade Central Battery with Integral Self-Test Diagnostics
Includes standard self-test diagnostics, and optional Building Management Interface
P1
Emergency Lighting Control
Shrink wrap module for slim linear or compact luminairs, EPR to 15W
P2
Emergency Lighting Control
Thermoplastic Housing for medium power luminairesl, EPE to 20W
Pathlite
Efficient and economical independent or remote units, with dual or single lamp heads and compact thermoplastic or metal enclosures, including Outdoor, hazardous atmosphere and NEMA 4X rated models.
DBE
Decorative Outdoor LED AC/Emergency Unit
Die Cast Aluminum Housing, dual emergency/normal lighting, photocell control
ELH
Low Profile, high performance lighting
ELP
Remote Capable, curved low profile housing, semi recessed heads
Pathlite Exit Combos
Commercial grade exit combo signs, with dual emergency lighting heads, thermoplastic or die cast housings, including Outdoor, hazardous atmosphere and NEMA 4X rated models.
CEM
Reduced Profile All LED Exit & Emergency Thermoplastic Combo
Thermoplastic compact assembly, 1.5W lamp heads
CEU
Low Profile All LED Exit & Emergency Combo
Thermoplastic low profile, rounded corners, up to 1W lamp heads
CKX
Thin Die-Cast Aluminum Combo
Die Cast architectural low profile housing with enclosed 3W lamp heads
CLP
Downlight Thermoplastic Combo
Thermoplastic architectural low profile with enclosed lightpipe, remote capable
CWL
Wet Location All LED Exit & Emergency Combo
Polycarbonate housing, 3.6W lamp heads, cold weather option, remote capable
Rapier Low Profile Die-Cast
Ultra-slim, architectural models with universal face, or specified single or double-face housings. Available with standard EXIT lettering, or custom wording and colors in RPRO models. Standard AC inputs with or without integral battery, or low voltage remote operation from Signtex central battery systems.
RPRO
Ultra Slim Die-Cast Aluminum LED Signs with Custom Graphics
Open-Face with internal edge-lit lens for custom lettering and colors
RPT
Thin Die-Cast Aluminum Exit Sign
Universal Single or Double Face, optional finishes
