LPS
Higher Wattage Inverters
Midsize-electrical inverter systems for powering 750 to 1150 watts of incandescent, fluorescent, induction or LED lighting loads. PWM output design provides clean, 60 Hz sinusoidal emergency power to loads. Fast and easy wall mounting.
- Surface mount models with keyhole slots on back Full 3-year unit warranty, battery pro-rated for 7 years
- UL924 Listed Meets NFPA 101, NEC, OSHA, CEC Title 20, FCC Part 15 Class A
- Certified for damp locations (20°C - 30°C)
- Battery Type: Sealed Lead Calcium (10 year design)
- Battery Voltage: 48VDC (LPS-750), 60VDC (LPS-950), 72VDC (LPS-1150)
- Runtime: 90 minutes standard
- Charger Type: Fully automatic, dual-mode
- Power Consumption (Charger Only): 53W max (4.3W standby) — LPS-750 63W max (5.4W standby) — LPS-950 73W max (6.7W standby) — LPS-1150 Operation Automatic transfer to emergency mode during power failure Maintains 100% lamp output Charger restores battery per UL924 specs
Color / Finish
- Black
- Bronze
- White
Dimming Protocol
- PWM
Lamp Source
- Fluorescent
- LED
Listings
- UL
Materials
- Steel
Ratings & Compliance
- Damp
- Exterior
- FCC
- Interior
- NFPA 101
- Title 20
Voltage
- 120 V
- 120-277 V
- 277 V
- 48 V
- Steel cabinet finished in white baked-on powder coat.
- Optional special color paint (-SP) finishes available.
- Sinusoidal output eliminates compatibility issues Supports incandescent, fluorescent, induction, LED Up to 1,000 ft distance from fixture 100% nominal lumen output
- Works with dimming ballasts Emergency loads can be ON, OFF, or SWITCHED Long-life sealed lead calcium battery Test switch and LED status indicators
- Surge Protection: Meets UL924
- Protection: Low voltage disconnect, polarity and short circuit protection
- Voltages: 120 or 277VAC, 60Hz
- Efficiency: 98% at full rated load (line)
- Waveform: Sinusoidal (digitally controlled)
- Static Voltage: ±5% during discharge; 0-100% linear load
- Frequencies: 60Hz ±0.3Hz during emergency Distortion: <3% THD (linear load)
- Transfer Time: <1 second Load Power Factor Range: 0.88 Lead to 0.88 Lag Minimum Loading: 0%
- Output Protection: Circuit breaker and overload shut down
Resources
- Steel cabinet finished in white baked-on powder coat.
- Optional special color paint (-SP) finishes available.
- Sinusoidal output eliminates compatibility issues Supports incandescent, fluorescent, induction, LED Up to 1,000 ft distance from fixture 100% nominal lumen output
- Works with dimming ballasts Emergency loads can be ON, OFF, or SWITCHED Long-life sealed lead calcium battery Test switch and LED status indicators
- Surge Protection: Meets UL924
- Protection: Low voltage disconnect, polarity and short circuit protection
- Voltages: 120 or 277VAC, 60Hz
- Efficiency: 98% at full rated load (line)
- Waveform: Sinusoidal (digitally controlled)
- Static Voltage: ±5% during discharge; 0-100% linear load
- Frequencies: 60Hz ±0.3Hz during emergency Distortion: <3% THD (linear load)
- Transfer Time: <1 second Load Power Factor Range: 0.88 Lead to 0.88 Lag Minimum Loading: 0%
- Output Protection: Circuit breaker and overload shut down
- Surface mount models with keyhole slots on back Full 3-year unit warranty, battery pro-rated for 7 years
- UL924 Listed Meets NFPA 101, NEC, OSHA, CEC Title 20, FCC Part 15 Class A
- Certified for damp locations (20°C - 30°C)
- Battery Type: Sealed Lead Calcium (10 year design)
- Battery Voltage: 48VDC (LPS-750), 60VDC (LPS-950), 72VDC (LPS-1150)
- Runtime: 90 minutes standard
- Charger Type: Fully automatic, dual-mode
- Power Consumption (Charger Only): 53W max (4.3W standby) — LPS-750 63W max (5.4W standby) — LPS-950 73W max (6.7W standby) — LPS-1150 Operation Automatic transfer to emergency mode during power failure Maintains 100% lamp output Charger restores battery per UL924 specs
Color / Finish
- Black
- Bronze
- White
Dimming Protocol
- PWM
Lamp Source
- Fluorescent
- LED
Listings
- UL
Materials
- Steel
Ratings & Compliance
- Damp
- Exterior
- FCC
- Interior
- NFPA 101
- Title 20
Voltage
- 120 V
- 120-277 V
- 277 V
- 48 V