RAE-CTRAE-CT
Connecticut Approved Rapier Accessible Exit
Aluminum housing, edgelit Exit with 6" Disabled Graphic. 1011.1.2 Accessible exits. Where exit signs are required
by Section 1011.1 of this code, accessible exit doors at the level of exit discharge that lead directly to accessible paths of exit discharge shall additionally be marked by the International Symbol of Accessibility. Such symbol shall be not less than 6 inches high and shall be incorporated into the required exit sign or shall be located directly adjacent to it. Such symbol shall meet
the requirements of Section 1011.
by Section 1011.1 of this code, accessible exit doors at the level of exit discharge that lead directly to accessible paths of exit discharge shall additionally be marked by the International Symbol of Accessibility. Such symbol shall be not less than 6 inches high and shall be incorporated into the required exit sign or shall be located directly adjacent to it. Such symbol shall meet
the requirements of Section 1011.
- Manufactured and tested to UL Standard 924.
- Conforms to NFPA Life Safety Code 101, UBC and NEC.
Color / Finish
- Red
- White
Lamp Source
- LED
Listings
- UL
Materials
- Acrylic
- Aluminum
- Polycarbonate
Mounting
- Ceiling
- Cove
- Pendant
- Recessed
- Surface
- Wall
Ratings & Compliance
- Buy America
- Damp
- Made in America
- Ultra-slim diecast aluminum LED emergency exit lighting system; the wall mount profile is 1/2″ above the surface.
- The die-cast outer housing contains a closely fitted acrylic lens.
- An LED array is recessed into the housing.
- The assembly is extremely rugged and can withstand severe impact and vibration without damage.
- For even further protection, clear polycarbonate security covers are available
- Isolated, all solid state power supply with 2-wire universal input from 120 VAC to 277 VAC with precise current and voltage regulation.
- Power supply is surge and spike protected, with a low voltage disconnect.
- The sealed power supply module with optional NICAD battery pack fits inside a standard 4″ square deep J-box.
- AC and DC wiring quickly attached with plug connectors.
Resources
- Ultra-slim diecast aluminum LED emergency exit lighting system; the wall mount profile is 1/2″ above the surface.
- The die-cast outer housing contains a closely fitted acrylic lens.
- An LED array is recessed into the housing.
- The assembly is extremely rugged and can withstand severe impact and vibration without damage.
- For even further protection, clear polycarbonate security covers are available
- Isolated, all solid state power supply with 2-wire universal input from 120 VAC to 277 VAC with precise current and voltage regulation.
- Power supply is surge and spike protected, with a low voltage disconnect.
- The sealed power supply module with optional NICAD battery pack fits inside a standard 4″ square deep J-box.
- AC and DC wiring quickly attached with plug connectors.
- Manufactured and tested to UL Standard 924.
- Conforms to NFPA Life Safety Code 101, UBC and NEC.
Color / Finish
- Red
- White
Lamp Source
- LED
Listings
- UL
Materials
- Acrylic
- Aluminum
- Polycarbonate
Mounting
- Ceiling
- Cove
- Pendant
- Recessed
- Surface
- Wall
Ratings & Compliance
- Buy America
- Damp
- Made in America
Similar Products
CNY
New York City Approved LED Exit & Incandescent Emergency Combo
Steel housing, two or three 12W thermoplastic lamp heads
MLE
Low Profile Downlight
Down Light, die cast alum housing, low profile, recessed or wall mount
RHP
Indoor High Performance MR16 LED Remote Head
High performance, compact housing with MR16 LED fully adjustable heads
MRH
Mini Indoor LED Remote Head
Low Profile and compact housing semi-recessed mini lamp heads
CRS
Crystal Surface Mount
Universal Wall or Ceiling, compact aluminum housing, optional inverted mount.
View All Similar Products
GUARDLITE Regionally Approved Exits, Combos & Safety Signs Collection
CAL
Chicago Approved Steel LED Exite & Emergency Combo
Steel housing, two 5.3W lamp heads, remote capacity 10W
CAEFP-CT
Connecticut Approve Exit Master Remote System
High Level edge-lit Exit with Die Cast Floor Level combination
NYT
New York City Approved Steel LED Exit Sign
Backlit, steel housing, surface mount
NYS
New York City Compliant Edgelit Aluminum Exit Sign
Edgelit, aluminum housing, surface mount
CRX
Chicago Approved Recessed Edgelit Exit
Aluminum housing, edgelit, recessed mount
View Entire Collection